We help with DIY and Home Improvements

How to fix your toilet

Inspect the Float and Inlet Valve
Take a look inside the tank. If the water level rises above the overflow tube, the issue could be with the float or the inlet valve on the ballcock. Remember that the float rises with the level of the water and tells the inlet valve when to shut off the flow. If this mechanism doesn’t function appropriately, the water keeps rising until it spills via the overflow tube and into the bowl. To verify the inlet valve, flush the toilet and, as the water rises, gently lift the rod that holds the float until you hear the water stop. If the water stops, the inlet valve is OK, and the issue is caused by the float.

Adjust the Float
A screw at the prime of the ballcock allows you to adjust the level of the float. With this adjustment, you should be in a position to reduce the level to which the water rises in the tank. If the adjustment fails to stop water from running into the overflow tube, the problem may be with the float itself. For instance, if the float has a hole in it and lies too low in the water, it never ever rises enough to trip the inlet valve. Verify to see whether or not the float needs replacing. A new rod and float are simple to replace and cost only a handful of dollars.

Turn Off the Water
If you test the inlet valve as described above and the water doesn’t cease, the issue is with the ballcock itself. Even though it’s attainable to repair a broken ballcock, it’s normally greatest to replace the whole assembly: After turning off the water at the shutoff valve, flush the toilet and hold down the deal with to take away most of the water from the tank. Remove the excess water at the bottom of the tank with a sponge.

Replace the Assembly
Remove the provide line that connects to the bottom of the ballcock at the base of the tank. Use slip-joint pliers to remove the nut securing the ballcock to the tank.
Pushing up from the bottom, lift out the assembly. Drop the new ballcock assembly into place. Thread on a new nut from underneath the tank, and tighten with slip-joint pliers. (Don’t overtighten the nut, or you could crack the tank.) Reattach the supply line. Inside the tank, clip the new refill tube in place. Turn the water on at the shutoff.

Test the Flapper
If you’ve checked the water level in the tank and it’s not rising above the overflow tube but you still hear or see water leak into the bowl, the second possible source of the leak is about the flapper. Testing for this is straightforward: turn off the water provide at the shutoff valve, then wait to see no matter whether the level in the tank drops. If it drops noticeably after about 15 minutes, the problem could be a flapper chain that’s as well tight, preventing the flapper from dropping all the way into the seat, or a leak in the flapper.

Replace the Flapper
Replacing a flapper is simple. The first step is to drain the tank. Turn off the water at the shutoff valve, flush the toilet and hold down the manage. There may possibly be a tiny water left in the bottom of the tank, but don’t be concerned about it. Wipe the flapper seat with a clean cloth to make positive it’s free of debris, and check it for cracks or splits. Check the flapper to make positive it’s not torn and that it fits tightly against the seat. If the flapper is broken or worn, pull it loose and replace it. Just pop a matching flapper onto the hinges at the base of the overflow tube. When it comes to DYI plumbing in Spartanburg SC, some projects you can handle on your own, but some may need a plumber in Spartanburg SC. If you don’t think you can handle the job, be sure to contact a professional.